MV2400-R

Model X Y Z TravelU/V MotorTableFinishWRTYChopper
MV 2400-S23.6 X 15.7 X 12.2
Ball Screws3 Sides15µ" Ra*
1 YrOpt
MV 2400-R23.6 X 15.7 X 12.2Cyl. Drive4 Sides6µ" Ra
2 YrStd
MV 2400ST23.6 X 15.7 X 16.5Cyl. Drive4 Sides6µ" Ra
2 YrStd


MV2400-S

MV2400-ST

The MV2400-S is a part of the most innovative and user-friendly wire EDM machine series on the market. The MV2400-S features a new, non-contact cylindrical drive system and the M700 series control with a 15-inch touchscreen. With advancements in machine construction and power supply technology, the MV2400-S is sure to revolutionize EDM machining and increase your shop's productivity. 

​​ WSM Technology, Inc.  

MV 2400 Models

MV2400-ST is now capable of submerged cutting up to 16.5 inches deep with full support of the best auto threading system on the market today.  With an annealing length of over 18 inches this system is capable of threading the maximum workpiece height both at the start point and through the gap if needed for a broken wire recovery.  The MV2400-ST features a new, non-contact cylindrical drive system and the M700 series control with a 15-inch touchscreen. With advancements in machine construction and power supply technology, the MV2400-ST is sure to revolutionize EDM machining and increase your shop's productivity.

*6µ" Ra Option

The new MV 2400-R features improvements in machine construction, auto-threading, internal machine communication, power supply technology and operating costs. For easier user interface, the MV2400-R Advance Plus utilizes the new M700 series control with a 15-inch touchscreen. It also showcases Mitsubishi's continuous dedication to high precision through new innovations—including a new non-contact Cylindrical Drive System. The technology available with the MV2400-R represents significant advancements in wire EDM technology